Correct Transport of Cable Drums

Cable drums are rounded spools that bear regular electrical wires and fiber-optic cables. These are manufactured available in hard wood, plastic or steel. Handling should be safe particularly during transport. Incorrect way of safe-keeping and moving can cause substantial damage both to the cable and drum. The cable will become unusable and you end up losing money.

As a result cable drums should have strong frames. Furthermore, there are specific measures to be considered. Look at the reels for any damages or deterioration prior to transport. Buy frames that are exceptionally sturdy. Proportions should be correct. This implies the cylinder should fit into the fabrication perfectly. Check manufacturer’s instructions for transportation and warehousing. This should include the right range of temperature.

Use the crane, axle spreader or spreader shaft to hoist the drum. Try to keep from putting unnecessary pressure on the overhang. If you utilize the forklift, make sure that the fork does not make contact with the cable or the cover. Use only the suitable apparatus for loading and unloading the cable reels. The framework should be stacked on even flooring to avoid pointless movements.

Avoid dropping these drums from the vehicle or ramp. The drum and its support should always be in a top to bottom position while being conveyed from one point to another. Drums must not be piled on top of each other. This is one reason for using spool frames. The framework will make sure that the drum does not roll down while inside the truck or during safe-keeping.

Use only the best suited vehicles for the transport process. Screws must secure the flanges. These should be very compact prior to moving the cable drums. Take into consideration that solid wood will shrink during hot weather and can loosen the screws leading to an accident. Label each drum depending on type, batch number, sizes, and other vital details. Mark the cable drum using the correct roll direction. Inspect any nails that may have been uprooted as well.

Cable cylinders for indoor storage should not be kept in open-air. The frame should also be steady to prevent any unnecessary movements. You can also use cardboard or composite merchandise made from paper, pure wood fiber, solid plastic, and adhesive. Seal the cable with lids as protection from dampness. Cable drums must not be exposed to extreme temperature or beneath direct sunlight. The frame will make certain that both the reel and cables are secured.

If you are looking for cable drum frames, call TCG industries by clicking on the link.